Technical overview
How SmartGATE rebuilds incoming power.
SmartGATE™ installs after the meter, in line with your switchgear. Patented technology extracts a fraction of the load, rebuilds the waveform, and reinjects it — regulating delivered voltage to your equipment’s exact specification.
Full ±8% voltage regulation at more than 99.5% efficiency — the only complete power-quality solution sized and priced for commercial buildings.
What it does
Hold voltage at nameplate, cycle by cycle.
Incoming supply drifts, sags, and swells inside the utility’s acceptable range. SmartGATE analyzes and corrects each cycle in real time, so the voltage reaching your systems stays inside the design window.
Your equipment sees the voltage it was designed for, across the full ±8% correction range.
Specifications
Engineered for the service entrance.
Inside the enclosure: the first transformer extracts up to 10% of system power, an active bridge constructs the correction waveform, and the second transformer reinjects it in line — compact enough to integrate into modern building infrastructure.
SUMMARY · FULL SPECIFICATIONS IN THE PDF DOWNLOAD
Full voltage regulation
Buck and boost within ±8% of supply, holding near-constant voltage on a cycle-by-cycle basis — lower energy use, longer equipment life.
Sag & swell mitigation
Boost responds to voltage sags within one cycle, extending your equipment’s ride-through envelope; swells are corrected before they reach your systems.
Automatic voltage reduction
Controlled reduction in discrete increments, including a 0% bypass step, to lower building energy usage.
Power factor improvements
Delivered in the same correction stage, alongside regulation — with efficiency exceeding 99.5% across operating ranges.
SmartGATE Insights™
See what your power is doing — across every building.
The Insights module records 38 power-quality parameters at one-minute increments and reports through a web portal — from a single service entrance to portfolio-wide views.
Measure it. Then manage it.
A Power Impact Assessment measures your incoming power against equipment design conditions — and if there’s a gap, SmartGATE closes it.